Mega System Tech iCV-03 Manual de usuario descargar pdf (Pagina 44)

OCTE SAFEdoc

FAB

Router

Power tools in poor condition are responsible for a vast number of injuries.

1. Wear EYE PROTECTION whenever using hand power tools.

2. Routers operate at high speeds and torque. Ensure all parts are tight and bits

are sharp. Use tool shields and face shields at all times. Keep a solid two-

handed grip at all times. Make sure your stance is solid.

3. Routers turn clockwise (when seen from top). Always feed from left to right,

otherwise you will ‘walk’ the bit. Cut with the grain of the wood whenever

possible.

4. You control the feed speed…do not force tool (listen to sound of motor) or

move too slowly (when you are burning material) LOOK, LISTEN AND

SMELL!

5. Ensure you are using proper depth of cut. Test cuts on scrap material. Make

multiple passes if necessary.

6. When bits become worn or damaged, they should be repaired or replaced

immediately. Show your instructor.

7. Use bits that are sharp, do not use blunt tools.

8. Make sure material to be routed is clamped solidly to the work bench

AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR

FAB SAFEdoc Page 41

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

Sin comentarios

Mega System Tech iCV-03 Manual de usuario Pagina 44